Larson Davis Human Vibration Meter HVM 200 |
Specifications |
Input |
Input Type | ICP® , IEPE or CCP |
Excitation Current | 2 mA |
Input Connector | ¼-28 4-pin male |
Input Linear Range |
( Fc weighting ) | 0.2 mV to 5.0 V at 80 Hz |
( Wh weighting ) | 0.09 mV to 5.0 V at 16 Hz |
Bandwidth | 0.4 Hz to 3000 Hz |
Range | Single range |
Calibration | TEDS or manual entry |
Overload Indicator | LED on HVM200 and icon in app |
Sample Rate | 7161.458 Hz |
Measured Values |
Measurement | Modes Hand-arm, Whole-body, Vibration |
Metrics by mode |
Vibration | RMS, Peak, Min, Max ( x, y, z & Σ ) |
Hand-arm | RMS, Peak, Min, MTVV, A ( 1 ), A ( 2 ), A ( 4 ), A( 8 ) ( x, y, z & Σ ) |
Whole-body | RMS, Peak, Min, MTVV, A ( 8 ), A ( 8 ) Exp, EP, VDV ( x, y, z & Σ ) |
Frequency Weightings |
Vibration Fa | ( 0.4 Hz to 100 Hz ), Fb ( 0.4 Hz to 1250 Hz ), Fc ( 6.3 Hz to 1250 Hz ) |
Hand-arm | Wh |
Whole-body | Wb, Wc, Wd, We, Wf, Wj, Wk, Wm |
Measurement Units | m/s2, cm/s2, ft/s2, in/s2, g, dB |
Time History ( Logging ) |
Store Interval | 1, 2, 5, 10, 20, 30 s; 1, 2, 5, 10, 20, 30 min; 1hr |
Stored Values | RMS and peak for x, y, z & Σ |
¹⁄₁ and ⅓ Octave Filters ( Optional ) |
¹⁄₁ Octave Filters | 0.5 Hz to 2000 Hz |
⅓ Octave Filters | 0.4 Hz to 2500 Hz |
Filter Selection | None, ¹⁄₁, ⅓ or ¹⁄₁ and ⅓ |
Weighting | Unweighted |
Measured Values | RMS, Max |
Compliance | IEC 61260-1:2014 Class 1 |
ANSI S1.11-2014 Part 1, Class 1 |
Time Data Recording ( Optional ) |
Data format | Binary – see HVM200 manual |
Power Supply |
Internal Battery | Rechargeable Li-ion, user replaceable |
External power | USB ( PSA035 ) |
Charge Time | 3.5 hours using PSA035 |
Battery Run Time | Connect to Wi-Fi 12 hours |
Access Point ( AP ) 9 hours |
USB power | 180 mA with battery charged |
Communication Interface |
USB | USB 2.0 hi-speed ( micro USB type B connector ) |
Wi-Fi | 802.11 b/g with WPA and WPA2 |
Run Modes |
Manual | Run/stop from button or using app |
Timed | Start at preset time |
Delayed | Start after 5, 10, 20, 30 or 60 second delay |
Physical |
Height | 4.6 in. ( 11.8 cm ) |
Width | 2.6 in. ( 6.7 cm ) |
Depth | 0.7 in. ( 1.8 cm ) |
Weight ( including battery ) | 4.6 oz. ( 130 gm ) |
Environmental |
Operating Temperature | 14 °F to 122 °F ( - 10 °C to 50 °C ) |
Operating Humidity | 0 to 90% relative humidity, non-condensing |
Included Accessories |
PSA035 | 100 – 240 VAC to 5 V USB power supply with adapters |
CBL217-01 | ¼-28 4-pin to ¼-28 4-pin, 1 ft. ( 30 cm ) cable |
BAT018 | Internal rechargeable lithium battery |
Compliance |
ISO 8041 : 2005 Human response to vibration - Measuring instrumentation |
IEC 61010-1 ( 2010 ) Safety |
IEC 61326-1:2013 EMC |
IEC 61325-2-3:2013 EMC safety |
ISO 2631-1:1997 Whole-body vibration – General requirements |
ISO 2631-2:2003 Whole-body vibration –Vibration in buildings |
ISO 2631-4:2001 Whole-body vibration – Rotational motion |
ISO 2631-5:2004 Whole-body vibration –Vibration containing shocks |
ISO 5349-1:2001 Hand-transmitted vibration – General requirements |
ISO 5349-2:2001 Hand-transmitted vibration – Practical guidance |
EN 1032:2003 Mechanical vibration - Testing of mobile machinery |
ANSI S2.70 |
Optional Accessories |
CBL216 | ¼-28 4-pin to 4-pin mini connector for SEN026 |
CBL217 | ¼-28 4-pin to ¼-28 4-pin, 5 ft. ( 1.5 m ) cable |
SEN020 | Triaxial accelerometer, 0.1 mV/( m/s2 ), 10-32 fem thread |
SEN026 | Triaxial accelerometer, 1 mV/( m/s2 ), for ADP063 |
SEN027 | Seat pad with triaxial accelerometer, 10 mV/( m/s2 ) |
SEN040F | Triaxial accelerometer, 0.1 mV/( m/s2 ), for ADP080A, 81A and 82A |
SEN041F | Triaxial accelerometer, 1 mV/( m/s2 ), for ADP080A, 81A and 82A |
ADP063 | Palm adapter for use with SEN026 |
ADP080A | “T” adapter for use with SEN040F or SEN041F |
ADP081A | Handle adapter for use with SEN040F or SEN041F |
ADP082A | Circle clamp adapter for use with SEN040F or SEN041F |
ADP084A | Kit including ADP080A, ADP081A, ADP082A and ADP063 |
CCS047 | Hard shell case for HVM200 and accessories |
CCS048-S | Small arm band for HVM200, fits arm circumference of 8 to 12.5 in. ( 20 to 32 cm ) |
CCS048-L | Large arm band for HVM200, fits arm circumference of 10.5 to 16.5 in. ( 27 to 42 cm ) |
394C06 | Hand-held shaker, 9.81 m/s2 @ 159.2 Hz |
CER-HVM200 | Factory calibration of HVM200, does not include sensor |
Ordering Information |
HVM200 | 3-channel vibration meter for general and human vibration. Includes CBL217-01. Sensors not included. |
HVM200-HA-40F | Kit for hand-arm vibration includes HVM200, CCS047, CCS048-L, ADP081A ,SEN040F & SWW-G4-HVM |
HVM200-WB | Kit for whole body vibration includes HVM200, CCS047, SEN027 & SWW-G4-HVM |
HVM200-ALL-40F | Kit for hand-arm and whole body vibration includes HVM200, CCS047, CCS048-L, ADP081A, SEN040F, SEN027 & SWW-G4-HVM |
HVM200-OB3 | Option for 1/1 and 1/3 octave filters. Includes SWW-G4-HVM |
HVM200-RAW | Option to record sampled waveforms for all three channels |
SWW-G4-HVM | G4 license to add support for HVM100 and HVM200 that can be installed concurrently on up to five computers |
SWW-G4-SDK | Software Development Kit |