phone Phone
+622122685913
close
menu

PSC

sql
Function Generator PI-8127 Pasco Scientific
Function Generator PI-8127 Pasco Scientific
Hover to Zoom

Jual Function Generator PI-8127 Pasco Scientific



Spesifikasi Function Generator PI-8127 Pasco Scientific

Function Generator PI-8127 Pasco Scientific

Overview

The Function Generator outputs sine, square, triangle, positive and negative ramps with a frequency range of 0.001 Hz to 150 kHz in addition to DC. ( A replacement for the PI-9587C )

Its powerful output, 1 Amp at ±10 Volts, makes it useful for driving speakers, string vibrators, and circuits.

Features

LCD Readout

The LCD displays frequency, voltage, current, waveform, and menus. For viewing demonstrations, there is a Large Digits Mode for increased readability of the frequency.The backlight has two levels, low and high, selectable using the menu. The low backlight isusefulin dark rooms.

Frequency/Range Selection

There are two ranges, 0.001 to 100 Hzand 0.001 to 100 kHz, selected using the range push-button switch ( integrated with frequency knob ).

Output Standby

Pushing the standby button disables the output without changing settings.

Output Current/Voltage Maximum

The maximum current or maximum voltage can be set using the menu. This is useful when the instructor needs to limit the voltage applied in a light bulb.

Offset Voltage

Any waveform may be offset with a DC voltage ranging from -10 V to +10 V, provided the peak voltage does not exceed 10 V.

Frequency Sweep

Sweep between any two frequencies at a selectable rate.

Available Waveforms

Sine

Triangle

Square

Positive Ramp

Negative Ramp

DC

Specifications

Input Power Source

15 V @ 1.6 amp AC/DC Adapter

Voltage Output

± 10 V @ 1 A, 5 mV Adjustment Resolution

Frequency Range

DC to 150 kHz with two ranges: 0.001 Hz to 999.999 Hz 0.001 kHz to 100 kHz ( 150 kHz for Sine Wave )

Frequency Resolution

0.001 Hz for the 0.001 to 100 Hz range;1 Hz for the 0.001 kHz to 100 kHz range.

Maximum Current/Voltage

Programmable

Offset Voltage

± 10 V, 5 mV Resolution

Waveforms

Sine, Triangle, Square, Positive Ramp, Negative Ramp, DC

External Voltage Input

Use the function generator to amplify an external source ( ± 10 V maximum )

Trigger Output

TTL Compatible; BNC jack on back of unit

Display

LCD Graphics Monochrome Display, 128 x 64, with Two-Level Backlight

Displays

Frequency, Waveform, Voltage, Current, Root mean Square ( RMS ) Current, Offset Voltage, Maximum Current/Voltage ( Not all simultaneously )

Special Display Mode

Large digits for frequency

Amplitude Modulation

Modulate the signal of one function generator using another

Frequency Sweep

Generate a signalto sweep through start/end frequency, select sweep time, and auto-repeat the sweep

Programmable Current Limit

Set the maximum current to limit the current output

USB Connection for software updates

Download latest software from pasco.com and install throughthe USB connection

Power Amplifier

Untuk keterangan lebih lanjut, silahkan download PDF ini :