Incubator

Incubator IN-010, IN-601 & IN-601 Digital GemmySpecificationIncubatorModel IN-010Capacity16, 40, 57, 75, 90, 110, 150, 200 LControl systemMicroprocessor systemTemp controlPIDTemp settingDigitalTemp readoutDigitalAir convectionForced convection by fanTemp uniformity±3.0 ºC at 37 ºCTemp stability±0.5 ºC at 37 ºCOver-temp alarm & shutoutYes, 4ºC to the set pointTimerDigital, 99 hr. 59 min. + HOLDTemperature rangeAmbient + 5 ºC to 75 ºCStandard accessory2 S/S mesh shelves, adjustableSpecificationIncubatorModel IN-601 & IN-601 ( Digital )Capacity34, 53, 75, 90, 110, 150 LControl systemAnalog MicroprocessorTemp controlON / OFF PIDTemp settingAnalog DigitalTemp readoutThermometer DigitalAir convection Natural (Gravity)Forced convectionTemp uniformity±5.0 ºC at 37 ºC ±3.0 ºC at 37 ºCTemp stability±3.0 ºC at 37 ºC ±1.0 ºC at 37 ºCOver-temp alarm & shutoutAt 80ºC 4ºC to the set pointTimerMechanical, 180 min + HOLDTemperature rangeAmbient + 5 ºC to 75 ºCStandard accessory2 S/S mesh shelves, adjustableInkubator Laboratorium

Incubator SI60 Analogue & SI60 Digital StuartSpecificationsTemperature rangeAmbient +5°C to 60°CTemperature fluctuation at 37°C±0.1°CTemperature variation between shelves±0.3°CNominal volume60 litresInternal dimensions ( w x d x h )450 x 380 x 380 mmExternal dimensions ( w x d x h )600 x 390 x 390 mmNet weight11.2 kgElectrical supply230 V, 50 Hz, 350 WOrder InformationModelDescriptionSI60Incubator, total visibility, analogueSI60DIncubator, total visibility, digitalSI60/1Acrylic base plateSI60/2Plastic coated shelf/rack system with two shelvesInkubator Laboratorium

Shaking Incubator Model IS-10, IS-10R, IS-10RL Daihan ScientificSpecificationsModelThermoStableThermoStableThermoStableIS-10IS-10RIS-10RLIllumination SystemNone FPL 55 W × 4 eaTemp. RangeAmbient +5℃ ~ 60℃10℃ ~ 60℃Temp. Accuracy & UniformityAccuracy : ±0.2℃ at 37℃, Uniformity : ±0.5℃ at 37℃Temp. SensorPT100 SensorHeater800 W1 kW1.2 kWCompressorNone1/3 HPCompressor ControlNoneIntelligent Control of Refrigerator for preventingOverload of CompressorRefrigerantCFC-Free ( R-404 A ) Refrigeration SystemShaking Speed & Stroke30 ~ 250 rpm, 25 mm Orbital MotionTimer & Alarm99 hr 59 min ( with Continuous run.), Error status & Timer-endDisplayDigital LCD with Back-Light FunctionControllerDigital Fuzzy Controller with Jog-Dial Switch ( Turn+Push )Room LampKrypton Lamp, 60 WNonePlatformIncluded Universal Platform for Various Shapes & Sizes of FlasksOptional Flask HolderDurable & Flexible Plastic Flask Holder ( up to 1000 ml )Available Max. Capacity of Flask Holderfor 50~100 mlAvailable 68 ea Flask Holder “FH100”, for 50~100 ml Flask200~300 mlAvailable 36 ea Flask Holder “FH250”, for 200~300 ml Flask500~1,000 mlAvailable 21 ea Flask Holder “FH500”, for 500~1,000 ml FlaskSafety CircuitOver Temp./ Current Protector, Leakage Breaker, Sensor Error DetectorMaterialInternal : Stainless steel ( ＃304 ), External : Powder Coated steelDimensionInternal : 750 × 720× h 400 mm, External : 1,065 × 900 × h 980 mmPacking Size ( W x D x H )1,220 × 1,060 × h 1,200 mm& Gross Weight231 kg238 kg238 kgPower Consumption800 W1.8 kW2.1 kWPower Supply & Cord/ Plug*1 Phase, AC 120 V, 60 Hz or AC 230 V, 50 / 60 HzAlat Laboratorium Umum

Shaking Incubator SI500 StuartSpecificationsTemperature rangeAmbient + 5°C to 60 °CTemperature display resolution0.1 °CTemperature precision± 0.5 °CTemperature fluctuation± 0.5 °CTemperature variation<0.5 °CSpeed range30 to 300 rpmOrbit diameter16 mmPlatform size335 x 335 mmInternal dimensions ( w x d x h )422 x 408 x 297 mmMaximum vessel height250 mmMaximum load10 kgOverall dimensions ( w x d x h )450 x 474 x 522 mmNet weight30 kgHeater power250 WElectrical supply230 V, 50 Hz, 300 WOrder InformationSI500Incubator, orbital shakerSI500/ IQOQIncubator, orbital shaker with IQ/OQ documentationSI500/ 1Tube rack, 1.5 ml x 64 microtubesSI500/ 2Tube, rack, 15 ml x 25 centrifuge tubesSI500/ 3Tube rack, 50 ml x 12 centrifuge tubesSI500/ 4Tube rack, 16 x 30 ml Universal containersInkubator Laboratorium

Cooled Incubator with Orbital Shaker SI600C StuartSpecificationsModelSI600CTemperature rangeAmbient -15 to 60°C ( min. 5°C )Temperature display resolution0.1°CTemperature precision± 0.5°CTemperature fluctuation± 0.5°CTemperature variation± 0.5°CSpeed range30 to 300 rpmOrbit diameter16 mmPlatform size520 x 390 mmCapacity115 LInt. dimensions ( w x d x h )625 x 455 x 380 mmMaximum vessel height320 mmMaximum load10 kgOverall dimensions ( w x d x h )675 x 562 ( 592+ ) x 640 mmNet weight60 kgHeater power400 WElectrical supply230 V, 50Hz, 450 WOrdering InformationModelDescriptionSI600CIncubator, orbital shaker, large cooledSRC4Recirculating cooler.Inkubator Laboratorium

Incubators Memmert IN30 Plus, IN55 Plus, IN75 Plus, IN110 Plus, IN160 Plus, IN260 Plus, IN450 Plus, IN750 PlusHighly sensitive, extremely accurate : Memmert lab incubator IIn the laboratory, the Memmert incubator I is ideal for all applications with temperatures up to +80 °C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully in this highly precise microbiological incubator.Temperature range up to +80 °C8 model sizes ( 32 to 749 litres volume )2 model variants: SingleDISPLAY and TwinDISPLAYNatural convection or forced air circulation N/FDouble doors (interior glass, exterior stainless steel) for a clear view without a drop in temperatureActivation of sterilisation routine via ControlCOCKPIT ( TwinDISPLAY )Memmert incubator I – a gentle force in the laboratoryTo guarantee optimum air circulation in the incubator chamber even when it is fully loaded, both model variants SingleDISPLAY and TwinDISPLAY are available with an adjustable air fan. Since our unique all-round surface heating is optimally geared to both natural convection and forced air circulation, the fan can be switched off entirely for sensitive samples and for samples which may not be exposed to air turbulence.Specific use in accordance with the German MPG ( Law on Medical Devices )In accordance with the German Law on Medical Products ( Directive 93/42/EEC ), the incubators INplus / IFplus can be used for the warming of irrigation solutions and infusions.A Memmert incubator offers unique advantagesIntuitive and easy-to-use operating menuAir exchange rates and air flap position electronically controllableTemperature ramps programmable via AtmoControl software ( models with TwinDISPLAY )Pre-heated fresh air prevents temperature fluctuationsAlmost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housingHeating concept specifically adapted for a precise and homogenous temperature controlA wide range of options for programming and documentation using interfaces, integrated data logger and software AtmoCONTROLInkubator Laboratorium

Incubators Memmert IF 30, IF 55, IF 75, IF 110, IF 160, IF 260, IF 450, IF 750Highly sensitive, extremely accurate : Memmert lab incubator IIn the laboratory, the Memmert incubator I is ideal for all applications with temperatures up to +80 °C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully in this highly precise microbiological incubator.Temperature range up to +80 °C8 model sizes ( 32 to 749 litres volume )2 model variants: SingleDISPLAY and TwinDISPLAYNatural convection or forced air circulation N/FDouble doors (interior glass, exterior stainless steel) for a clear view without a drop in temperatureActivation of sterilisation routine via ControlCOCKPIT ( TwinDISPLAY )Memmert incubator I – a gentle force in the laboratoryTo guarantee optimum air circulation in the incubator chamber even when it is fully loaded, both model variants SingleDISPLAY and TwinDISPLAY are available with an adjustable air fan. Since our unique all-round surface heating is optimally geared to both natural convection and forced air circulation, the fan can be switched off entirely for sensitive samples and for samples which may not be exposed to air turbulence.Specific use in accordance with the German MPG ( Law on Medical Devices )In accordance with the German Law on Medical Products ( Directive 93/42/EEC ), the incubators INplus / IFplus can be used for the warming of irrigation solutions and infusions.A Memmert incubator offers unique advantagesIntuitive and easy-to-use operating menuAir exchange rates and air flap position electronically controllableTemperature ramps programmable via AtmoControl software ( models with TwinDISPLAY )Pre-heated fresh air prevents temperature fluctuationsAlmost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housingHeating concept specifically adapted for a precise and homogenous temperature controlA wide range of options for programming and documentation using interfaces, integrated data logger and software AtmoCONTROLInkubator Laboratorium

SI600 Large Shaking IncubatorSpecificationsTemperature rangeAmbient + 5 - 60°CTemperature display resolution0.1°CTemperature precision± 0.5°CTemperature fluctuation± 0.5°CTemperature variation0.5°CSpeed range, rpm30 to 300 rpmOrbit diameter, mm16Platform size, mm526 x 390Capacity, L115Internal dimensions ( w x d x h ), mm623 x 465 x 395Maximum vessel height, mm300Maximum load, kg10Overall dimensions ( w x d x h ),mm675 x 542 x 642Net weight, kg55Heater power400 WElectrical supply230 V, 50 Hz, 450 WOrder InformationModelDescriptionSI600Incubator, orbital shaker, largeSI600/ IQOQIncubator, orbital shaker, large with IQ/ OQ documentationSI500/ 1Tube rack, 1.5 ml x 64 microtubesSI500/ 2Tube rack, 15 ml x 25 centrifuge tubesSI500/ 3Tube rack, 50 ml x 12 centrifuge tubesSI500/ 4Tube rack, 16 x 30 ml Universal plastic containersInkubator Laboratorium

Low Temp.BOD Incubator Model IR-150, IR-250, IR420, IR-700 Daihan ScientificSpecificationsModelsThermoStableThermoStableThermoStableThermoStableIR-150IR-250IR-420IR-700Capacity150 Lit.250 Lit.420 Lit.700 Lit.Air Flow-typeForced Convection-typeTemp. Range & Accuracy0 ℃ ~ 60 ℃, ± 0.2℃ at 37℃Temp. Uniformity & Sensor±0.5℃ at 37℃, ±1.4℃ at 50℃, PT100 SensorHeat-up Time20 min. to 37 ℃35 min. to 37 ℃20 min. to 50 ℃35 min. to 50 ℃Recovery Time (Door open 30 sec)10 min. to 37 ℃12 min. to 37 ℃12 min. to 50 ℃15 min. to 50 ℃Heating Power/Consumption700 W1 kW1.2 kW2 kWCompressor¼ HP⅓ HP½ HP½ HPCompressor ControlIntelligent Control of Refrigerator for preventing Overload of CompressorRefrigerantCFC-Free ( R-404A ) Refrigeration SystemTimer & Alarm99 hr 59 min ( with delay / Continuous run ), Error status & Timer-endDisplayDigital LCD with Back LightControllerDigital Fuzzy Controller with Jog-Shuttle Switch ( Turn & Push )Inner Doorwith 1 ea of Inner Tempered Glass DoorShelvesIncluded 3 ea of Teflon-coated steel ShelvesPermitted Total LoadTotal Load : 48 kg (16 kg × 3 Shelves)Safety CircuitOver Temp. and Over Current Protector, Sensor Error DetectorMaterialInternal : Stainless steel ( ＃304 ), External : Powder Coated steelDimensionInterior mm505 × 505 × 610505 × 505 × 1,000705 × 605 × 1,000800 × 700 × 1,250W x D x HExterior mm640 × 832 × 1,313640 × 832 × 1,703840 × 932 × 1,753935 × 1,027 × 2,000Net Weight118 kg157 kg202 kg234 kgPacking Size W x D x H mm900 × 1,000 × 1,650900 × 1,000 × 2,0401,100 × 1,100 × 2,1401,220 × 1,220 × 2,260& Gross Weight191 kg217 kg277 kg313 kgPower Consumption1.6 kW1.8 kW2.3 kW2.4 kWPower Supply & Cord/ Plug*1 Phase, AC 120 V, 60 Hz or AC 230 V, 50 / 60 HzInkubator Laboratorium

Laboratory Incubator CLN 15, CLN 32, CLN 53 Pol Eko AparaturaModelCLN 15CLN 32CLN 53Technical dataAir convectionNaturalNaturalNaturalChamber capacity [l] 1153256Working capacity [l]153256SterownikMicroprocessor with external LCD graphic displayMicroprocessor with external LCD graphic displayMicroprocessor with external LCD graphic displayTemperaturaTemp. range [°C]+5°C Above ambient temp..+100°C+5°C Above ambient temp..+100°C+5°C Above ambient temp..+100°CTemp. resolution every … [°C]0,10,10,1Over temp. protectionClass 2.0 to DIN 12880 / class 3.1 (option)Class 2.0 to DIN 12880 / class 3.1 (option)Class 2.0 to DIN 12880 / class 3.1 (option)ChamberDoor typeDoubleDoubleDoubleInteriorAcid-proof stainless steel to DIN 1.4301Acid-proof stainless steel to DIN 1.4301Acid-proof stainless steel to DIN 1.4301HousingSTDPowder coated sheetPowder coated sheetPowder coated sheetINOX/GStainless steel linen finishStainless steel linen finishStainless steel linen finishOverall Dims [mm] 2Width A510590590Height B550630700Depth C470520620Internal dims [mm]Width D320400400Height E230320390Depth F200250360Technical DataShelves (standard \ max)01.lut01.mar02.majMax shelf workload [kg] 5101025- Reinforced shelf version (PW) 3--50Max unit workload [kg]203040- Reinforced unit version (W) 4--80Weight [kg]273550Voltage*230V 50Hz230V 50Hz230V 50HzNominal power [W]350350450Warranty24 months24 months24 monthsManufacturerPOL-EKO-APARATURA Laboratory Incubator CLN 115, CLN 180, CLN 240 Pol Eko AparaturaModelCLN 115CLN 180CLN 240Technical dataAir convectionNaturalNaturalNaturalChamber capacity [l] 1112180245Working capacity [l]112180245SterownikMicroprocessor with external LCD graphic displayMicroprocessor with external LCD graphic displayMicroprocessor with external LCD graphic displayTemperaturaTemp. range [°C]+5°C Above ambient temp..+100°C+5°C Above ambient temp..100°C+5°C Above ambient temp..+100°CTemp. resolution every … [°C]0,10,10,1Over temp. protectionClass 2.0 to DIN 12880 / class 3.1 (option) / class 3.1 in TOP+Class 2.0 to DIN 12880 / class 3.1 (option) / class 3.1 in TOP+Class 2.0 to DIN 12880 / class 3.1 (option) / class 3.1 in TOP+ChamberDoor typeDouble / door with viewing window (option)Double / door with viewing window (option)Double / door with viewing window (option)InteriorAcid-proof stainless steel to DIN 1.4301Acid-proof stainless steel to DIN 1.4301Acid-proof stainless steel to DIN 1.4301HousingSTDPowder coated sheetPowder coated sheetPowder coated sheetINOX/GStainless steel linen finishStainless steel linen finishStainless steel linen finishOverall Dims [mm] 2Width A650650810Height B85010301200Depth C710820770Internal dims [mm]Width D460470600Height E540720800Depth F450560510Technical DataShelves (standard \ max)02.lip03.wrz03.paźMax shelf workload [kg] 5252525- Reinforced shelf version (PW) 35050100Max unit workload [kg]607590- Reinforced unit version (W) 4120120300Weight [kg]6594126Voltage*230V 50Hz230V 50Hz230V 50HzNominal power [W]450650850Warranty24 months24 months24 monthsManufacturerPOL-EKO-APARATURAAll the above technical data refer to standard units (without optional accessories)* - 230V 60Hz, 115V 60Hz, 3P 230V 60Hz - on request1 - Working capacity of chamber can be smaller2 - Depth doesn`t include 50 mm of power cable3 - Reinforced shelf4 - Reinforced version5 - On uniformly loaded surfaceInkubator Laboratorium