Conductivity Meter

Micro 800 Handheld Conductivity-TDS Meter PT1340 PalintestSpecificationConductivityRange0 - 200 mS/cmResolution0.01 µS/cm - 0.1 mS/cmAccuracy± 1% full scaleCalibrationAuto/manual ; one point per rangeTDSRange0 - 200 pptResolution0.01 ppm - 0.1 pptAccuracy± 1% full scaleCalibrationManual; one point per rangeSalinityRange0 - 50 pptResolution0.01 pptAccuracy± 1% full scaleCalibrationManual; one point per rangeTemperatureRange-10°C – +110 °CResolution0.1°CAccuracy± 0.5°CCalibrationOffset in 0.1 increments, ± 10°CInstrumentMemoryUp to 500 data setsOutputUSB and RS232Real-Time ClockTime and date stamp on calibration and stored dataPower2 x AA batteriesDimensions & Weight200 x 83 x 57 mm, 500 gAdditional InformationPT1340Micro 800 Conductivity/TDS Handheld MeterPT1340CONReplacement probe for Micro 800 Conductivity/TDS meterPT142/2High range conductivity solution, 500 ml, 12.88 mS/cmPT142/3Mid range conductivity solution, 500 ml, 1412 µS/cmPT142/4Low range conductivity solution, 500 ml, 74 µS/cmPT142/8TDS calibration solution ( 442 ), 500 ml, 3000 ppmPT142/9TDS calibration solution ( 442 ), 500 ml 300 ppmPT142/10TDS calibration solution ( 442 ), 500 ml 50 ppmConductivity Meter

Micro 600 Handheld Conductivity Meter PT1220 PalintestSpecificationRange0 - 19.99 µs/cm, 20 - 199.9 µs/cm, 200 - 1999 µs/cm, 2 - 19.99 mS/cm,20 - 199.0 mS/cmResolution0.05% full scaleAccuracy± 1% full scale + 1 LSDTemp. Range0 - 80°CTemp.0.1°CTemp. Accuracy± 0.5°CNumber of Calibration PointsUp to 5 maximum ( 1 per range )Power4 x AAA batteriesDimensions and Weight157 x 85 x 42 mm, 255 gAdditional InformationPT1220Micro 600 Conductivity Handheld MeterPT142/1Replacement TDS/conductivity probePT142/2High range conductivity solution, 500 ml, 12.88 mS/cmPT142/3Mid range conductivity solution, 500 ml, 1412 µS/cmPT142/4Low range conductivity solution, 500ml, 74 µS/cmConductivity Meter

Conductivity Pocket Sensor PT157 PalintestSpecificationRange0 - 200 µS/cm, 0 - 2000 µS/cm, 0 - 20 mS/cmResolution0.1 µS/cm, 1 µS/cm, 0.01 mS/cmAccuracy± 1% full scaleTemperature Range0 - 50°CTemperature Resolution0.1°CTemperature Accuracy± 0.5°CCalibrationUp to 3 pointsPower Supply4 x A76/LR44 button cell batteriesDimensions & Weight165 x 38 x 38 mm, 90 gAdditional InformationPT157Conductivity Pocket SensorPT157CONReplacement conductivity sensorConductivity Meter

Thermo Scientific Eutech Expert CTS TestersSpecificationsDescriptionExpert CTS pocket tester for measuring conductivity,TDS or salinity with temp.Range (Conductivity)0.00 to 20.00 mS/cmAccuracy (Conductivity)±2% full scaleResolution (TDS)10 ppm for 0 to 1990 ppm; 0.10 ppt for 2.00 to 20.00 pptTDS Factor Range0.40 to 1.00 (selectable)Resolution (Salinity)0.1 pptSalinity Measurement ModesPer practical salinity curveCalibrationAuto and Manual CalibrationCalibration Points (Conductivity)1Range (Temp.)0.0 to 50.0°C, 32.0 to 122.0°FAccuracy (Temp.)±0.6°C, ±1.0°FDisplay Type4-digit, double-lineMeasurement ModesConductivity, TDS, salinity, temperatureBattery Type4 x 1.5V Micro AlkalineCertifications/ComplianceCE, FCC Class A, ROHS-2Relative Humidity Range5 to 85 %, non-condensingAccuracy±2 % full scale ± 1LSDHeight (Metric)3cmRangeConductivity: 0.00 to 20.00mS; TDS: 0.00 to 20.00 ppt ( with TDS Factor 1.00 ); Salinity: 0.0 to 10.0 pptTemp. (Metric) Range0 to 50.0 °CWarranty1 yearIncludesExpert CTS tester with batteriesResolution (Conductivity)10 μS/cm for 0 to 1990 μS/cm; 0.10 mS/cm for 2.00 to 20.00 mS/cmRange (TDS)0.00 to 20.00 pptAccuracy (TDS)±2% full scaleRange (Salinity)0.0 to 10.0 pptAccuracy (Salinity)±2% full scaleTemp. CompensationYesCalibration PointsSingle pointCalibration ModesConductivity, TDS, Salinity, TempResolution (Temp.)0.1°C, 0.1°FTemp. Probe Calibration1 pointBacklight OptionNoBattery Life75 hours (average)IP RatingIP-67Temp. (Metric) Operating5° to 45° C (ambient)Weight (Metric)93.7 gCompensationAutomatic Temp. CompensationLength (Metric)17cmResolution电导率：10uS <2.00mS, 0.10mS >2.00mS; TDS: 10 ppm <2.00ppt, 0.10 ppt >2.00ppt; 盐度：0.10 pptWidth (Metric)4.5cmProduct TypePocket testerConductivity Meter

Cond 6Plus Eutech InstrumentsSpecificationsProduct SpecificationDescriptionConductivity Range.. to 19.99 uS/cm19.9 uS/cm to 199.9 uS/cm199.9 uS/cm to 1999 µS/cm2.00 mS/cm to 19.99 mS/cm20.0 mS/cm to 199.9 mS/cmResolution & Accuracy0.05% full scale & ±1% full scale + 1 LSDCalibration Points4 (1 per range) auto; 5 (1 per range) manualTemp. Range0 to 80.0 °C (32 to 176 °F)Resolution & Accuracy0.1 °C (0.1 °F) & ±0.5 °C (±0.9 °F)Temp. CompensationAutomatic / Manual (0 to 80 °C)Cell Constant0.1, 1.0, 10.0 (selectable)Temp. Coefficient0.0% to 3.0%Temp. Normalisation20.0 to 25.0 °CNo. of Calibration PointsUp to 5 max. (1 per range)Special FunctionsAuto Power-off after 17 minutes;Hold & Self-diagnostic messagesPower4 'AAA' x 1.4V batteries; >100 hoursOrder InformationOrder No.ItemECCON603PLUSKEutech Cond 6+ Conductivity Meter with Electrode ECCONSEN91B & Conductivity Carrying Kit (Includes 1 x 1413 uS, 12.88 mS, 84 uS KCl Standard Solution and 1x Deionised (Rinse) Water (60ml Each)ECCON603PLUSEutech Cond 6+ Conductivity Meter with Electrode ECCONSEN91BConductivity Meter

Conductivity Meter CON 450 Eutech InstrumentsSpecificationsProduct SpecificationDescriptionConductivityRange0 to 200 mSResolution0.01 µS to 0.1 mSAccuracy±1 % full scaleCalibrationAuto/manual; 1 point/rangeTDSRange0 to 200 ppt (TDS factor 1.0)Resolution0.01 ppm to 0.1 pptAccuracy±1 % full scaleCalibrationManual; 1 point/rangeSalinityRange0 to 50 pptResolution0.01Accuracy±1 % full scaleCalibrationManual; 1 pointTemperatureRange-10.0 to 110.0 ºC (14.0 to 230.0 ºF)Resolution0.1 ºC/ºFAccuracy±0.5 ºC; ±0.9 ºFCalibrationOffset in 0.1 increments, ±10 ºC or ±18 ºFOthersDisplayCustom LCD with backlightMemoryStores up to 500 data setsOutputUSB or RS232Real-Time ClockTime and date stamp on calibration and stored dataTemp. CompensationAutomatic or manual from -10 to 110 ºCPowerTwo AA batteries (included), >300 hours (without backlight); AC adapter (optional)Dimensions (L x W x H)Meter: 7 7/8" x 3 1/8" x 2 1/4" (20 x 8.3 x 5.7 cm) Boxed: 9 1/8" x 9 1/8" x 2 3/4" (23 x 23 x 7 cm)WeightMeter: 1 lb (0.5 kg) Boxed: 1.4 lb (0.7 kg)Order InformationOrder No.ItemMeterECCONWP45003CON 450 Meter & Electrode: Meter, conductivity cell (K = 1.0), Grip-Clip™, two AA batteriesECCONWP45003KCON 450 Meter Kit: Meter, conductivity cell(K = 1.0), Grip-Clip™, two AA batteries, hard carry case, USB cable, calibration solutionsElectrodesECCONSEN72WConductivity/ATC cell, glass body, K = 0.1CONSEN91WConductivity/ATC cell, K = 1.0CONSEN92WConductivity/ATC cell, epoxy, K = 10.0AccessoriesGRIPCLIPGrip-Clip™60X426401Optional 100 / 240 VAC SMPS power adapter, 9 V, 6 WMINIPHONEUSBUSB cable for 450 series, mini phone plug to USB30X427301RS232 cable for 450 series, mini phone plug to RS232 9-pin (F)ECCON84BT84 μS conductivity standard, 480 mLECCON1413BT1413 μS conductivity standard, 480 mLECCON1288BT12.88 mS conductivity standard, 480 mLECCON1118BT111.8 mS conductivity standard, 480 mLConductivity Meter

Thermo Scientific Eutech Cond 6PlusSpecificationsProduct SpecificationDescriptionConductivityRange0.00 - 19.99 µS/cm( Based on 1.0 Cell Constant )20.00 - 199.9 µS/cm200.0 - 1999 µS/cm2.00 - 19.99 mS/cm20.0 - 200.0 mS/cmResolution0.05 % full scaleAccuracy±1 % of full scale ±1 LSDTemperatureRange0.0 to 100.0 ºC / 32.0 to 212 ºF(80.0 ºC with supplied probe)Resolution0.1 ºC / 0.1 ºFAccuracy±0.5 ºC / ±0.9 ºFCompensationATC / MTC (0 to 80 ºC)Normalization20.0 or 25.0 ºCOperating Temp.5 to 45 ºCMeter FeaturesCalibration Points4 (1 per range) auto, 5 (1 per range) manualTemp. Coefficient0.0 - 10.0 %Cell Constant0.1, 1.0, 10.0Auto-Off20 min after last key pressedInputBNC, 2.5 mm phono socketPower/Battery Life4 x 1.5 V ‘AAA’ alkaline batteries (included);> 500 hoursDimensions/WeightMeter (LxWxH)15.7 x 8.5 x 4.2 cm; 255 gBoxed (LxWxH)36 x 28 x 8 cm; 1555 gOrder InformationOrder No.ItemECCON603PLUSKCOND 6+ with CONSEN91B electrode, KCl calibration solutions (84 μS/cm, 1413 μS/cm, 12.88 mS/cm), and DI rinse water (60 mL each), Grip-Clip, and batteries in hard carrying caseECCON603PLUSCOND 6+ with CONSEN91B electrode, Grip-Clip, batteriesCONSEN91BReplacement electrode with ATC, k=1.0CONSEN72BEpoxy electrode with ATC, k=0.1GRIPCLIPGrip-Clip electrode holderConductivity Meter

CyberScan COND 610 Eutech InstrumentsSpecificationsProduct SpecificationDescriptionConductivity Range.. to 500.0 mSResolution & Accuracy0.01 µS/cm / 0.1 µS/cm / 0.001 mS/cm /0.01 mS/cm / 0.1 mS/cm±1% Full Scale + 1 LSDTDS.. to 500 pptResolution & Accuracy0.01 ppm / 0.1 ppm / 0.001 ppt /0.01 ppt / 0.1 ppt±1% Full Scale + 1 LSDSalinity.. to 80 pptResolution & Accuracy0.05% & ±1% Full Scale + 1 LSDResisitivity0 to 20.00 mΩResolution & Accuracy0.05% & ±1% Full ScaleTemp. Range-10.0 to 110.0 °C (14.0 to 230 °F) (Meter)Resolution & Accuracy0.1 °C/ 1.0°FTemp. CompensationAutomatic / Manual (0 to 100 °C)No. of Calibration Points4 (1 per range) Auto5 (1 per range) ManualCal Due AlarmYes (Days - Max 30)Auto-Cal Options84, 1413 uS/cm12.88, 111.8 mS/cmSlope/ Offset DisplayYes (Display + Icon)InputDC phono sockets, 8-pin connectorLCD DisplayBack-lit Dot MatrixMemory500 data setsOutputYes (IrDA/ RS232C)Special FunctionsStability Indicator; Self-diagnostic; Non-Volatile Memory; Hold & Auto-Power Off after 20 minutesGLPYesIngress ProtectionIP67Power4 'AAA' x 1.4V batteries or 9VDC power adapterOrder InformationOrder No.ItemECCONWP61043KCOND610 Meter with 3m Cable 4-Cell Electrode, Das Software, Power Adapter & TDS carrying kitECCONWP61003COND610 Meter with 3m Cable 4-Cell Electrode & DAS SoftwareECCONWP61000COND610 Meter with DAS SoftwareECCONSEN91J2 Stainless Steel Rings Ultem-body Electrode with ATC, Cell Constant K=1.0, 16X110mm, 8-Pin Connector, 1m Cable01X 2387614-Cell Epoxy-body Electrode with ATC, Cell Constant K=1.0, 8-Pin Connector, 3m Cable01X030132Universal Power AdapterECMICROPRNTR01Serial Impact Micro-Printer: Dot-matrix, paper-roll portable printer with 25-pin female connector. Includes one roll of paper and a 110/120 VAC power adapter.[ DISCONTINUED ]ECMICROPRNTR02Serial Impact Micro-Printer: Dot-matrix, paper-roll portable printer with 25-pin female connector. Includes one roll of paper and a 220/230 VAC power adapter.[ DISCONTINUED ]ECMICROPRNTR02CLKSerial Impact Micro-Printer with Built-in Real Time Clock: Dot-matrix, paper-roll portable printer with 25-pin female connector. Includes one roll of paper and a 220/230 VAC power adapter.[ DISCONTINUED ]ECADPTRM9M25Adpater for RS232 Communication Cable: 9-pin male to 25-pin male connector.01X447601USB IrDA Interface Adapter01X344202RS232 (LED) Interface AdaptorConductivity Meter

CyberScan COND 600 Eutech InstrumentsSpecificationsProduct SpecificationDescriptionConductivity Range.. to 200.0 mSResolution & Accuracy0.01 µS/cm / 0.1 µS/cm / 0.001 mS/cm /0.01 mS/cm / 0.1 mS/cm±1% Full Scale + 1 LSDTDS.. to 200 pptResolution & Accuracy0.01 ppm / 0.1 ppm / 0.001 ppt /0.01 ppt / 0.1 ppt±1% Full Scale + 1 LSDTemp. Range-10.0 to 110.0 °C (14.0 to 230 °F) (Meter)Resolution & Accuracy0.1 °C / 1.0 °FTemp. CompensationAutomatic / Manual (0 to 100 °C)No. of Calibration Points4 (1 per range) Auto5 (1 per range) ManualCal Due AlarmYes (Days - Max 30)Auto-Cal Options84, 1413 uS/cm12.88, 111.8 mS/cmSlope/ Offset DisplayYes (Display + Icon)InputDC phono sockets, 8-pin connectorLCD DisplayBack-lit Dot MatrixMemory500 data setsOutputYes (IrDA/ RS232C)Special FunctionsStability Indicator; Self-diagnostic; Non-Volatile Memory; Hold & Auto-Power Off after 20 minutesGLPYesIngress ProtectionIP67Power4 'AAA' x 1.4V batteries or 9VDC power adapterOrder InformationOrder No.ItemECCONWP60043KCOND600 Meter with 3m Cable 4-Cell Electrode, Das Software, Power Adapter & TDS carrying kitECCONWP60003COND600 Meter with 3m Cable 4-Cell Electrode & DAS SoftwareECCONWP60000COND600 Meter with DAS SoftwareECCONSEN91J2 Stainless Steel Rings Ultem-body Electrode with ATC, Cell Constant K=1.0, 16X110mm, 8-Pin Connector, 1m Cable01X 2387614-Cell Epoxy-body Electrode with ATC, Cell Constant K=1.0, 8-Pin Connector, 3m Cable01X030132Universal Power AdapterECMICROPRNTR01Serial Impact Micro-Printer: Dot-matrix, paper-roll portable printer with 25-pin female connector. Includes one roll of paper and a 110/120 VAC power adapter.[ DISCONTINUED ]ECMICROPRNTR02Serial Impact Micro-Printer: Dot-matrix, paper-roll portable printer with 25-pin female connector. Includes one roll of paper and a 220/230 VAC power adapter.[ DISCONTINUED ]ECMICROPRNTR02CLKSerial Impact Micro-Printer with Built-in Real Time Clock: Dot-matrix, paper-roll portable printer with 25-pin female connector. Includes one roll of paper and a 220/230 VAC power adapter.[ DISCONTINUED ]ECADPTRM9M25Adpater for RS232 Communication Cable: 9-pin male to 25-pin male connector.01X447601USB IrDA Interface Adapter01X344202RS232 (LED) Interface AdaptorConductivity Meter

Conductivity Meter CON 150 Eutech InstrumentsSpecificationsProduct SpecificationDescriptionConductivityRange0 to 200 mSResolution0.01 µS to 0.1 mSAccuracy±1 % full scaleCalibrationAuto/manual; 1 point/rangeTDSRange0 to 200 ppt (TDS factor 1.0)Resolution0.01 ppm to 0.1 pptAccuracy±1 % full scaleCalibrationManual; 1 point/rangeTemperatureRange-10.0 to 110.0 ºC (14.0 to 230.0 ºF)Resolution0.1 ºC/ºFAccuracy±0.5 ºC; ±0.9 ºFCalibrationOff set in 0.1 increments, ±10 ºC or ±18 ºFOthersDisplayThree line custom LCDTemp. CompensationAutomatic or manual from -10 to 110 ºCTemperature0.0 to 10.0 %/ºCCoefficientMemoryStores up to 150 data setsPowerTwo AA batteries (included), >500 hours continuous use; AC adapter (optional)Dimensions (LxWxH)Meter: 7 7/8" x 3 1/8" x 2 1/4" (20 x 8.3 x 5.7 cm)Boxed: 9 1/8" x 9 1/8" x 2 3/4" (23 x 23 x 7 cm)WeightMeter: 1 lb (0.5 kg)Boxed: 1.4 lb (0.7 kg)Order InformationOrder No.ItemMeterECCONWP15003CON 150 Meter & Electrode: Meter, conductivity cell (K = 1.0), Grip-Clip™, two AA batteriesECCONWP15003KCON 150 Meter Kit: Meter, conductivity cell (K = 1.0), Grip-Clip™, two AA batteries, hard carry case, calibration solutionElectrodesECCONSEN72WConductivity/ATC cell, glass, K = 0.1CONSEN91WConductivity/ATC cell, K = 1.0CONSEN92WConductivity/ATC cell, epoxy, K = 10.0AccessoriesGRIPCLIPGrip-Clip™60X426401Optional 100 / 240 VAC SMPS power adapter, 9 V, 6 WECCON84BT84 μS conductivity standard, 480 mLECCON1413BT1413 μS conductivity standard, 480 mLECCON1288BT12.88 mS conductivity standard, 480 mLECCON1118BT111.8 mS conductivity standard, 480 mLConductivity Meter